Australian Standards & Compliance
Compliance you can hand straight to your certifier
Every Seamless window and door supplied to the Australian market is engineered and tested against the standards that govern residential and commercial construction. This hub brings the certificates, test reports and standards references your specifiers, builders and certifiers need into one place.
Standards reference
The framework Seamless products are engineered and documented against for the Australian market.
| Standard | What it governs | Applies to | Docs available |
|---|---|---|---|
| AS 2047:2014Windows & external glazed doors in buildings | Materials, construction, water penetration resistance, structural performance and operation of windows and external doors. | All residential & commercial window and door supply | ✓ |
| AS 1288Glass in buildings — selection & installation | Human impact safety, wind, and structural glazing requirements governing the glass specified in each unit. | Glazing selection for every project | ✓ |
| AS/NZS 1170.2Structural design actions — wind actions | Wind load assumptions used to rate products by serviceability and ultimate limit-state pressures for a given wind region. | Wind region & exposure rating | ✓ |
| AS/NZS 4666Insulating glass units | Performance and durability requirements for double-glazed (IGU) sealed units used in thermally broken systems. | Thermally broken / double-glazed series | ✓ |
| NCC / BCA energy efficiencyNational Construction Code thermal performance | U-value and SHGC inputs required to demonstrate a project meets the energy efficiency provisions of the NCC. | Energy compliance documentation | ✓ |
Product-specific test certificates, wind-pressure ratings and energy values are issued per series — request the documents below or contact our technical team.
Test reports & certificates
Request the documentation your project file needs. Reports and certificates are issued per series so you receive the exact evidence for the products you're specifying.
Window & door test reports
Structural, water penetration and operating force test results for each window and door series.
Request document →Glazing compliance statement
Glass selection, safety glazing and structural glass documentation for specified configurations.
Request document →Wind load rating certificates
Serviceability and ultimate limit-state wind pressure ratings by series and wind region.
Request document →Energy performance data (U-value / SHGC)
Thermal performance values to support energy efficiency reporting for your project.
Request document →Declaration of conformity
Manufacturer's declaration confirming products are supplied to the applicable Australian Standards.
Request document →Warranty & maintenance guide
Warranty terms and recommended maintenance schedule to keep certified performance in service.
Request document →Compliance FAQ
Common questions from builders, specifiers and certifiers.
Are Seamless products certified to AS 2047:2014?+
Yes. Windows and external doors supplied to the Australian market are engineered and tested against AS 2047:2014, with test reports issued per series on request.
Can I get product-specific wind load ratings?+
Yes. Wind pressure ratings are determined using AS/NZS 1170.2 and issued per series and wind region, so you can match the product to your site's exposure category.
Do you provide glazing compliance documentation?+
Glass is selected and documented to AS 1288 for human-impact safety and structural requirements. A glazing compliance statement is available for the configurations you specify.
Can you supply U-value and SHGC data for NCC reporting?+
Yes. Thermal performance values for thermally broken and double-glazed series are available to support energy efficiency reporting under the National Construction Code.
How do I request the full documentation pack for a project?+
Contact our technical team with your series selection and project details and we'll compile the relevant test reports, certificates and performance data into one pack.
Need documentation for a specific project?
Send us your series selection and project details. Our technical team will compile the relevant test reports, certificates and performance data into a single pack for your certifier.
CONTACT US
HK: Room 1301, 13/F, Prosper Commercial Building, 9 Yin Chong Street, Mongkok, Kowloon, Hong Kong
Australia: 601/488 Bourke Street Melbourne VIC, 3000
Mainland China: No.8, Boai East Road, GaoBian Industry Zone, ShiShan Town, NanHai District, Foshan City, Guangdong Province